Woodcraft of San Antonio

Intro To The Lathe

Friday, April 25, 9:30 AM - 4:30 PM

Have you thought about turning a beautiful project on the lathe? Now you can, in this class we will turn a bowl. This will introduce you to end grain, as well as side grain and the challenges they bring. Louis will teach you the various parts of the lathe, proper safety, turning techniques, and a ton of useful tips. Finally, you will learn the various styles of finishing for your project. Not only do you learn to turn, but you take your project home with you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Router Basics

Saturday, April 26, 9 AM - 12 PM

During this hands-on class students will learn about the different types of routers, router bits, maintenance procedures, and safety tips. After some open discussion about how a router can be an asset in your shop, you will move into actual operation. It is time for a few skill drills and learn to apply proper techniques to get a smooth profile on your project. This is a great refresher class and stepping stone to the afternoon class which is Router Table Basics. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Router Table Basics

Saturday, April 26, 1 PM - 4 PM

During this class students will learn how a router table can be a valuable asset in the shop. This is a hands-on class where you will learn proper safety techniques, set-up, bit selection, and maintenance of your router table. If you have ever thought about making your own custom moulding/trim then this class is a must. In fact, after some open discussion you will learn how a couple of bits can produce a variety of profiles. Then you will actually mill a custom piece of moulding/trim. This is a great class for anyone wanting to get the most out of their router table. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To The Lathe

Monday, April 28, 9:30 AM - 4:30 PM

Have you thought about turning a beautiful project on the lathe? Now you can, in this class we will turn a bowl. This will introduce you to end grain, as well as side grain and the challenges they bring. Louis will teach you the various parts of the lathe, proper safety, turning techniques, and a ton of useful tips. Finally, you will learn the various styles of finishing for your project. Not only do you learn to turn, but you take your project home with you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Pen Turning Basics

Friday, May 2, 9:30 AM - 2 PM

Use basic spindle turning skills to craft two beautiful wooden ink pens. Learn all the components used such as pen blanks, mandrels, pen mills and the pen press. Next you will make a Slim Line pen, then choose to either make a Wall Steet II pen or a Cigar pen on the lathe. Pen turning is easy and enjoyable, and you end up with a couple of great ink pens. No Refunds for Cancellations/Reschedules within 7 days of Class date..

3D Stair Step Cutting Board Class

Saturday, May 3, 9:30 AM - 4:30 PM

This is a great opportunity to make your own 3D Stair Step End Grain Cutting Board using only three different woods - maple, cherry and walnut. You will learn step by step how to make this cutting board that will really impress your friends and family. You will cover basic bandsaw mechanics, tuning the bandsaw, and making perfect straight or angled cuts. At the end of the class each student will have a fantastic 3D Stair Step Cutting Board made with their own hands. This class is designed for woodworkers of all skill levels. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Woodshop 101

Monday, May 5, 9:30 AM - 4:30 PM

Looking to get started in woodworking but not sure where to begin? This is the class for you! Paul will introduce you to the most common tools in the shop and assure you understand how to operate each of them safely. You will also learn the essentials about wood grain and movement as you move through the milling process. Students will be paired up during the class, and will leave with a cutting/cheese board that will be a joy to show off This is a hands-on class so come ready to get dirty, have some fun, and create something beautiful!!! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Woodshop 101 at Night

Part 1: Wednesday, May 7, 5:30 PM - 8:30 PM

Part 2: Thursday, May 8, 5:30 PM - 8:30 PM

Looking to get started in woodworking but not sure where to begin? This is the class for you! Louis will introduce you to the most common tools in the shop and assure you understand how to operate each of them safely. You will also learn the essentials about wood grain and movement as you move through the milling process. Students will be paired up during the class, and will leave with a cutting/serving board that will be a joy to show off. This is a hands-on class so come ready to get dirty, have some fun, and create something beautiful!! This is a two session night class. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To The Lathe

Friday, May 9, 9 AM - 4:30 PM

Have you thought about turning a beautiful project on the lathe? Now you can, in this class we will turn a bowl. This will introduce you to end grain, as well as side grain and the challenges they bring. Louis will teach you the various parts of the lathe, proper safety, turning techniques, and a ton of useful tips. Finally, you will learn the various styles of finishing for your project. Not only do you learn to turn, but you take your project home with you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To Woodcarving

Saturday, May 10, 10 AM - 2 PM

We have a great class for anyone interested in Woodcarving. Students will learn how to carve with basic techniques, how to sharpen your tools and how to select that perfect piece of wood. Using only a knife, students will carve a 3D Basswood project. This is an excellent beginner class for adults and children who are considering Woodcarving as a new and fun hobby. This class is always very popular so, sign up early to avoid disappointment. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Folding Rocking Chair

Part 1: Saturday, May 10, 2 PM - 6 PM

Part 2: Sunday, May 11, 11 AM - 5 PM

Are you ready to take your woodworking skills to the next level? You will build your own truly unique folding rocking chair under the hands-on guidance of the chair’s designer. Made from high quality cherry and maple woods, it is sure to become a family heirloom. In the class, we will use the bandsaw, table saw, miter saw, drill press, drum sander, drill, router, and hand tools. If you have some basic woodworking experience, come join us! Class size is limited to 4 students.

End Grain Cutting Board

Monday, May 12, 9:30 AM - 4:30 PM

This eye-catching kitchen accessory may look challenging, but it's amazingly easy to construct and makes for one tough cutting surface. In this class you too can make this striking project from maple, cherry and walnut. Join Louis and help rustle up some wood, clamps and water-resistant glue and get started. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Band Saw Boxes

Friday, May 16, 9:30 AM - 4:30 PM

This class will help you develop skills and techniques needed in making boxes on the band saw. Smooth cuts, interesting designs all lead to new projects, new designs, and great gifts. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To The Lathe

Saturday, May 17, 9:30 AM - 4:30 PM

Have you thought about turning a beautiful project on the lathe? Now you can, in this class we will turn a bowl. This will introduce you to end grain, as well as side grain and the challenges they bring. Louis will teach you the various parts of the lathe, proper safety, turning techniques, and a ton of useful tips. Finally, you will learn the various styles of finishing for your project. Not only do you learn to turn, but you take your project home with you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Table Saw Basics

Monday, May 19, 9 AM - 12 PM

In this class the student will learn the fundamentals of using the table saw. Safety will be stressed. You will learn the various parts of the table saw, various types of table saws and their uses. You will also learn basic cutting operations and will make the cuts in a hands-on process. Safety will be an important part of the class. Get the fundamentals of using this important woodshop tool in class. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Band Saw Basics

Monday, May 19, 1 PM - 4 PM

Learn how to get the best performance from a truly versatile machine. We will demonstrate proper blade tracking setup, wheel alignment, and safety for your bandsaw. Get the best out of your bandsaw by learning more of what it can do for you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Sharpening: Using A Tormek, Wolverine, Or Sorby Pro Edge

Wednesday, May 21, 5 PM - 8:30 PM

Louis will go over the different types of sharpening stones, and sandpaper, for sharpening by hand and with the Wolverine, Pro Edge and Tormek sharpening machines. You will learn about how to find the correct angle for sharpening and honing to give your turning tools a razor sharp edge. Bring your three most-used lathe tools to sharpen. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Introduction To Wood Burning

Friday, May 23, 9:30 AM - 4:30 PM

Wood burning (pyrography) is an age-old craft to create images in wood...whether it be flat surfaces, or decorations in turned pieces. In this hands-on class, Louis teaches the techniques used in making a beautiful picture burned into wood. You will learn layout, copying, design transfer, wood selection, and burning methods. A wood burning tool is included in the materials cost. You will leave with a beautiful picture on wood. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Turn A Peppermill

Saturday, May 24, 9:30 AM - 4:30 PM

During this class Louis will teach you how to turn your own pepper mill. He will assist you with, basic designs, material selection, boring holes, assembly, and finishing. You will leave with a new skill, and your own pepper mill to give as a gift or for your own use. Sign up now these classes fill up quickly. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To The Lathe

Monday, May 26, 9:30 AM - 4:30 PM

Have you thought about turning a beautiful project on the lathe? Now you can, in this class we will turn a bowl. This will introduce you to end grain, as well as side grain and the challenges they bring. Louis will teach you the various parts of the lathe, proper safety, turning techniques, and a ton of useful tips. Finally, you will learn the various styles of finishing for your project. Not only do you learn to turn, but you take your project home with you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Woodshop 101

Friday, May 30, 9:30 AM - 4:30 PM

Looking to get started in woodworking but not sure where to begin? This is the class for you! Paul will introduce you to the most common tools in the shop and assure you understand how to operate each of them safely. You will also learn the essentials about wood grain and movement as you move through the milling process. Students will be paired up during the class, and will leave with a cutting/cheese board that will be a joy to show off This is a hands-on class so come ready to get dirty, have some fun, and create something beautiful!!! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Router Table Basics

Saturday, May 31, 1 PM - 4 PM

During this class students will learn how a router table can be a valuable asset in the shop. This is a hands-on class where you will learn proper safety techniques, set-up, bit selection, and maintenance of your router table. If you have ever thought about making your own custom moulding/trim then this class is a must. In fact, after some open discussion you will learn how a couple of bits can produce a variety of profiles. Then you will actually mill a custom piece of moulding/trim. This is a great class for anyone wanting to get the most out of their router table. No Refunds for Cancellations/Reschedules within 7 days of Class date.

3D Diamond Cutting Board

Monday, June 2, 9:30 AM - 4:30 PM

This is a great opportunity to make your own 3D End Grain Cutting Board using only three different woods - maple, cherry and walnut. You will learn step by step how to make this cutting board that will really impress your friends and family. You will cover basic bandsaw mechanics, tuning the bandsaw, and making perfect straight or angled cuts. At the end of the class each student will have a fantastic 3D Cutting Board made with their own hands. This class is designed for woodworkers of all skill levels. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To The Lathe

Friday, June 6, 9:30 AM - 4:30 PM

Have you thought about turning a beautiful project on the lathe? Now you can, in this class we will turn a bowl. This will introduce you to end grain, as well as side grain and the challenges they bring. Louis will teach you the various parts of the lathe, proper safety, turning techniques, and a ton of useful tips. Finally, you will learn the various styles of finishing for your project. Not only do you learn to turn, but you take your project home with you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Resin Casting Basics

Saturday, June 7, 9 AM - 2 PM

Are you interested in learning the steps to make a Resin Casting for the lathe? During this class we will cover the following steps; mixing the resin using a gram scale, mixing colorants (dyes or poweders), filling molds, and proper usage of a pressure pot. We will discuss differernt types of molds, materials to make a mold, materials to put in the mold, and ways to attach your casting to a lathe. Now it is time to cast your own project. You will take home your own casting to take home and turn. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Router Basics

Monday, June 9, 9 AM - 12 PM

During this hands-on class students will learn about the different types of routers, router bits, maintenance procedures, and safety tips. After some open discussion about how a router can be an asset in your shop, you will move into actual operation. It is time for a few skill drills and learn to apply proper techniques to get a smooth profile on your project. This is a great refresher class and stepping stone to the afternoon class which is Router Table Basics. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Router Table Basics

Monday, June 9, 1 PM - 4 PM

During this class students will learn how a router table can be a valuable asset in the shop. This is a hands-on class where you will learn proper safety techniques, set-up, bit selection, and maintenance of your router table. If you have ever thought about making your own custom moulding/trim then this class is a must. In fact, after some open discussion you will learn how a couple of bits can produce a variety of profiles. Then you will actually mill a custom piece of moulding/trim. This is a great class for anyone wanting to get the most out of their router table. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Woodshop 101 at Night

Part 1: Wednesday, June 11, 5:30 PM - 8:30 PM

Part 2: Thursday, June 12, 5:30 PM - 8:30 PM

Looking to get started in woodworking but not sure where to begin? This is the class for you! Louis will introduce you to the most common tools in the shop and assure you understand how to operate each of them safely. You will also learn the essentials about wood grain and movement as you move through the milling process. Students will be paired up during the class, and will leave with a cutting/serving board that will be a joy to show off. This is a hands-on class so come ready to get dirty, have some fun, and create something beautiful!! This is a two session night class. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Table Saw Basics

Friday, June 13, 9 AM - 12 PM

In this class the student will learn the fundamentals of using the table saw. Safety will be stressed. You will learn the various parts of the table saw, various types of table saws and their uses. You will also learn basic cutting operations and will make the cuts in a hands-on process. Safety will be an important part of the class. Get the fundamentals of using this important woodshop tool in class. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Band Saw Basics

Friday, June 13, 1 PM - 4 PM

Learn how to get the best performance from a truly versatile machine. We will demonstrate proper blade tracking setup, wheel alignment, and safety for your bandsaw. Get the best out of your bandsaw by learning more of what it can do for you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Whittle a Figure

Saturday, June 14, 10 AM - 2 PM

Join carver Jerry McNulty as he guides you through the steps of carving a full figure flat plane style carving using only a knife. This is a great follow up class to the intro to woodcarving class. Students are welcome from all levels. Basic cuts will be reviewed before the project is started. The Detail Knife included with the Intro to Woodcarving Class is the one recommended for use in this class. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Turning Segmented Bowls

Monday, June 16, 9 AM - 4:30 PM

In this class, Louis will cover all of the aspects of turning a segmented bowl. Included in the class will be instruction on the difference between stacking segmented rings, making staves and wood lamination. You will learn the mathematics of design, cutting, and glue up. Using the table saw Louis will cover the various methods of cutting segments which will be glued into segment rings. At the end of the class, you will have a segmented bowl to turn. Take advantage of this offering... the class should fill up quickly.No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To The Lathe

Friday, June 20, 9:30 AM - 4:30 PM

Have you thought about turning a beautiful project on the lathe? Now you can, in this class we will turn a bowl. This will introduce you to end grain, as well as side grain and the challenges they bring. Louis will teach you the various parts of the lathe, proper safety, turning techniques, and a ton of useful tips. Finally, you will learn the various styles of finishing for your project. Not only do you learn to turn, but you take your project home with you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To The Scroll Saw: Puzzle

Saturday, June 21, 9 AM - 4:30 PM

In this class you will learn to use a scroll saw. Louis will teach you proper safety procedures, blade selection, set-up, design options, and material selection. Now it is time for some skill drills so you can get a feel for straight cuts as well as curved cuts. Next it is time to cut your project with your newly acquired skills. You end the afternoon with a new skill as well as a puzzle. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Pen Turning Basics

Monday, June 23, 9:30 AM - 2 PM

Use basic spindle turning skills to craft two beautiful wooden ink pens. Learn all the components used such as pen blanks, mandrels, pen mills and the pen press. Next you will make a Slim Line pen, then choose to either make a Wall Steet II pen or a Cigar pen on the lathe. Pen turning is easy and enjoyable, and you end up with a couple of great ink pens. No Refunds for Cancellations/Reschedules within 7 days of Class date..

End Grain Cutting Board

Part 1: Wednesday, June 25, 5:30 PM - 8:30 PM

Part 2: Thursday, June 26, 5:30 PM - 8:30 PM

This eye-catching kitchen accessory may look challenging, but it's amazingly easy to construct and makes for one tough cutting surface. In this class you too can make this striking project from maple, cherry and walnut. Join Louis and help rustle up some wood, clamps and water-resistant glue and get started. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Band Saw Boxes

Friday, June 27, 9:30 AM - 4:30 PM

This class will help you develop skills and techniques needed in making boxes on the band saw. Smooth cuts, interesting designs all lead to new projects, new designs, and great gifts. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Woodshop 101

Saturday, June 28, 9:30 AM - 4:30 PM

Looking to get started in woodworking but not sure where to begin? This is the class for you! Paul will introduce you to the most common tools in the shop and assure you understand how to operate each of them safely. You will also learn the essentials about wood grain and movement as you move through the milling process. Students will be paired up during the class, and will leave with a cutting/cheese board that will be a joy to show off This is a hands-on class so come ready to get dirty, have some fun, and create something beautiful!!! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To The Lathe

Monday, June 30, 9:30 AM - 4:30 PM

Have you thought about turning a beautiful project on the lathe? Now you can, in this class we will turn a bowl. This will introduce you to end grain, as well as side grain and the challenges they bring. Louis will teach you the various parts of the lathe, proper safety, turning techniques, and a ton of useful tips. Finally, you will learn the various styles of finishing for your project. Not only do you learn to turn, but you take your project home with you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Pen Turning Basics

Saturday, July 5, 9:30 AM - 2 PM

Use basic spindle turning skills to craft two beautiful wooden ink pens. Learn all the components used such as pen blanks, mandrels, pen mills and the pen press. Next you will make a Slim Line pen, then choose to either make a Wall Steet II pen or a Cigar pen on the lathe. Pen turning is easy and enjoyable, and you end up with a couple of great ink pens. No Refunds for Cancellations/Reschedules within 7 days of Class date..

Woodshop 101

Monday, July 7, 9:30 AM - 4:30 PM

Looking to get started in woodworking but not sure where to begin? This is the class for you! Paul will introduce you to the most common tools in the shop and assure you understand how to operate each of them safely. You will also learn the essentials about wood grain and movement as you move through the milling process. Students will be paired up during the class, and will leave with a cutting/cheese board that will be a joy to show off This is a hands-on class so come ready to get dirty, have some fun, and create something beautiful!!! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To The Lathe

Friday, July 11, 9:30 AM - 4:30 PM

Have you thought about turning a beautiful project on the lathe? Now you can, in this class we will turn a bowl. This will introduce you to end grain, as well as side grain and the challenges they bring. Louis will teach you the various parts of the lathe, proper safety, turning techniques, and a ton of useful tips. Finally, you will learn the various styles of finishing for your project. Not only do you learn to turn, but you take your project home with you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro to Chip Carving

Saturday, July 12, 10 AM - 2 PM

Chip carving is a unique and beautiful style of woodcarving. What looks intricate and complicated can be learned in a few hours using only a knife. From simple modern geometric patterns to the complex old-world style, this class will teach you the basics including how to apply a pattern to the wood, holding the knife correctly, and staining or waxing your finished project. The class includes a chip carving knife, strop, and practice boards. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Turn A Peppermill

Monday, July 14, 9:30 AM - 4:30 PM

During this class Louis will teach you how to turn your own pepper mill. He will assist you with, basic designs, material selection, boring holes, assembly, and finishing. You will leave with a new skill, and your own pepper mill to give as a gift or for your own use. Sign up now these classes fill up quickly. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Woodshop 101 at Night

Part 1: Wednesday, July 16, 5:30 PM - 8:30 PM

Part 2: Thursday, July 17, 5:30 PM - 8:30 PM

Looking to get started in woodworking but not sure where to begin? This is the class for you! Louis will introduce you to the most common tools in the shop and assure you understand how to operate each of them safely. You will also learn the essentials about wood grain and movement as you move through the milling process. Students will be paired up during the class, and will leave with a cutting/serving board that will be a joy to show off. This is a hands-on class so come ready to get dirty, have some fun, and create something beautiful!! This is a two session night class. No Refunds for Cancellations/Reschedules within 7 days of Class date.

End Grain Cutting Board

Friday, July 18, 9:30 AM - 4:30 PM

This eye-catching kitchen accessory may look challenging, but it's amazingly easy to construct and makes for one tough cutting surface. In this class you too can make this striking project from maple, cherry and walnut. Join Louis and help rustle up some wood, clamps and water-resistant glue and get started. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To The Lathe

Saturday, July 19, 9:30 AM - 4:30 PM

Have you thought about turning a beautiful project on the lathe? Now you can, in this class we will turn a bowl. This will introduce you to end grain, as well as side grain and the challenges they bring. Louis will teach you the various parts of the lathe, proper safety, turning techniques, and a ton of useful tips. Finally, you will learn the various styles of finishing for your project. Not only do you learn to turn, but you take your project home with you! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Dovetails Using The Porter Cable Dovetail Jig

Monday, July 21, 9:30 AM - 2 PM

Using the Porter Cable Dovetail Jig you will learn to make beautiful and strong dovetail joints.The Porter Cable jig is simple to use, but needs proper techniques to set it up, tune it, and use. The student will leave with the knowledge to make through and half-blind joints. No Refunds for Cancellations/Reschedules within 7 days of Class date.

Woodshop 101

Friday, July 25, 9:30 AM - 4:30 PM

Looking to get started in woodworking but not sure where to begin? This is the class for you! Paul will introduce you to the most common tools in the shop and assure you understand how to operate each of them safely. You will also learn the essentials about wood grain and movement as you move through the milling process. Students will be paired up during the class, and will leave with a cutting/cheese board that will be a joy to show off This is a hands-on class so come ready to get dirty, have some fun, and create something beautiful!!! No Refunds for Cancellations/Reschedules within 7 days of Class date.

Turning Segmented Bowls

Saturday, July 26, 9:30 AM - 4:30 PM

In this class, Louis will cover all of the aspects of turning a segmented bowl. Included in the class will be instruction on the difference between stacking segmented rings, making staves and wood lamination. You will learn the mathematics of design, cutting, and glue up. Using the table saw Louis will cover the various methods of cutting segments which will be glued into segment rings. At the end of the class, you will have a segmented bowl to turn. Take advantage of this offering... the class should fill up quickly.No Refunds for Cancellations/Reschedules within 7 days of Class date.

Intro To The Lathe

Monday, July 28, 9:30 AM - 4:30 PM

Have you thought about turning a beautiful project on the lathe? Now you can, in this class we will turn a bowl. This will introduce you to end grain, as well as side grain and the challenges they bring. Louis will teach you the various parts of the lathe, proper safety, turning techniques, and a ton of useful tips. Finally, you will learn the various styles of finishing for your project. Not only do you learn to turn, but you take your project home with you! No Refunds for Cancellations/Reschedules within 7 days of Class date.