Poplar, Tulip Poplar or Yellow Poplar (Liriodendron tulipifera) is a domestic species that is very popular for paint grade projects. The heartwood is light cream to yellowish-brown with some occasional streaks of gray or green. It has a straight, uniform grain, with a medium texture. It is easy to work. We recommend sanding to a little higher grit than you might usually do prior to finishing. Poplar is a utility wood in nearly every sense. Common uses include utility cabinets and furniture, carvings, doors, millwork, mouldings, shelving, toys, teenware and turnings. Poplar veneer is also used for a variety of applications: either dyed in various colors, or on hidden undersides of veneered panels to counteract the pull of the glue on an exposed side that has been veneered with another, more decorative wood species.

S4S Dimensional Lumber (Surfaced on Four Sides) provides a smooth finish and uniform dimensions for versatile applications. All sizes are nominal. This means the measurement of a piece of lumber can be reduced by up to 1/2" in width and length.

Features:

• The tallest hardwood tree in North America
• Versatile wood with enough strength for most applications, sufficient stiffness, stability, and wear resistance
• A film finish over stain or dye will make this wood look great
• Native to North America

Specifications:

• All sizes are nominal.

What's Included:

• (1) Poplar S4S Dimensional Lumber

Notes:

• Wood is a product of nature, and as such, no two pieces are alike to start with, the same wood growing in different locales can vary greatly even though it is the exact same species.
• Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.
• Cut from quality, kiln-dried stock. The grain runs with the longest dimension.
• Thin Stock is sawn to +/- 1/8" of the listed size.
• Carving and Turning Blocks are sawn to +/- 1/4" of the listed size.
• Plywood sizes are nominal, the dimensions are +/- 1/8" of the listed size.
• Larger blocks are sawn to +/- 1/4" of the listed size.
• Smaller blocks are sawn to +/- 1/8" of the listed size.
• Spindle stock, or stock that is 1-1/2" - 2" wide is sawn to +/-1/8" of the listed size.