• Extra-large, 2-piece cast iron table for a total working surface area of 15" x 20"
• 1-1/2 HP 115/230V motor
• Full 6" under-guide capacity with 13-1/2" frame-to-blade clearance
• Poly V-belt maximizes power transmission while minimizing noise and vibration
• Balanced, 9-spoke cast iron wheels run smoothly
• Easy-to-read tensioning gauge settings indicated in blade width increments
• Carter quick tension release lever speeds up blade changes
• Durable micro-adjustable dual-bearing blade guide system above and below the table
• Quick-release T-square style fence system with resaw assembly
• 93-1/2" long blade with a blade width ranging from 1/8" to 3/4" wide
• Option for a 6" Riser Block, making the total blade length 105"
• 60-watt halogen lamp built into the body, providing direct light on the blade and workpiece while cutting
• Chip blower ensures a clean, visible cut line
• Built-in 4" dust port
• Frame-mounted push-button switch
• Rigid 1-piece welded stand requires no assembly

• Style: Floor Model
• Motor Type: TEFC (totally-enclosed fan-cooled)
• Motor Power: 1-1/2 HP
• Motor Current: 11 / 5.5A
• Motor Phase : 1
• Motor Voltage: 115 / 230V
• Prewired Voltage: 115V
• Recommended Circuit Size: 30A (115V), 20A (230V)
• Wheel Diameter: 14"
• Blade Length: 93-1/2" (With 6" Riser Block installed, blade length required will be 105")
• Blade Speed: 3000 SFPM
• Cutting Capacity Height: 6"
• Cutting Capacity Width: 13-1/2"
• Dust Collection Minimum CFM Required: 350 CFM
• Dust Port Outside Diameter: 4"
• Maximum Saw Blade Width: 3/4"
• Minimum Saw Blade Width: 1/8"
• Overall Dimensions (L x W x H): 20" x 34" x 68"
• Stand Footprint (L x W): 16" x 17-1/2"
• Table Height from Floor: 44"
• Main Table Size (L x W): 15" x 15"
• Extension Table Size (L x W): 15" x 5-1/2"
• Table Tilt: 10° Left, 45° Right

• (1) Powermatic - PWBS-14CS 14" Woodworking Bandsaw
• (1) 6” Riser block kit
• (1) Adjustable miter gauge
• (1) Rip fence
• (1) Gooseneck work light and chip blower
• (1) Bandsaw blade - 93-1/2" x 3/8" x 0.020" x 6 TPI

• With 6" Riser Block installed, blade length required will be 105"

Shipping / Billing Information

All shipments must be inspected and any damage reported within 3 days of receipt.
Address corrections and cancellations may not be possible once order is submitted. Requested changes may incur additional charges.
This product ships direct from the manufacturer:

• Your order will ship in 4 -7 approximately business days.
• This product is considered special order. Your account will be charged when you place your order.
• Express or overnight shipping is not available for this product.
• Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.

Return Information

Warranty Information