Woodcraft of Walpole

Build an Acoustic Guitar

Part 1: Friday, November 22, 8 AM - 7 PM

Part 2: Saturday, November 23, 8 AM - 6 PM

Part 3: Sunday, November 24, 8 AM - 3 PM

Many of those who have played or even admired the beauty of the guitar have shown interest in someday making an heirloom instrument that can be played today and passed on and continued to be played for generations. This class is designed to take a beginner/imtermediate woodworker through the steps to make a steel string acoustic guitar from a kit. You will learn the terminology and techniques focused on many of the specialized processes to complete your personalized instrument. The process is broken down into small steps to familiarize the student with the construction of the neck including truss rod installation, fingerboard & fretting, abalone inlay and construction of the body including brace trimming/fitting, top installation, bridge gluing/alignment, purfling and final fit up of the neck to body joint using a bolt-on system. Each guitar will be completed leaving the final top coat finish up to the student. Look for other classes designed for finishing techniques. Two models will be available to choose from, either Sapele or Sycamore. Tuition fee includes the guitar kit along with a hard-shell case.

Introduction to Sharpening Methods and Techniques

Tuesday, November 26, 6 PM - 9 PM

This class is an overview of the various sharpening methods, techniques, jigs, and abrasives/sharpening stones commonly used to sharpen most woodworking hand tools. The lecture and demonstration by Mickey will also cover the use of power grinding, both wet and dry, with various abrasives along with slower and less efficient methods employed to achieve a sharp edge on chisels, plane blades, turning tools, scrapers, and carving chisels. This class is intended to clear up any confusion or mysteries that beginners or even advanced woodworkers have about tool sharpening. Time permitting, students will be given an opportunity to use some of the available equipment. Students are also encouraged to bring in a dull chisel or plane blade to enhance the discussion.

Introduction to CNC

Wednesday, December 4, 6 PM - 9 PM

This class will help you decide if CNC Routing is right for you. This class will focus on the essential CNC processes and knowledge needed to help you with your decision. Students will learn the basics regarding the CAD/CAM software that drives the CNC routing machines as well as the general operation of a CNC router. The class includes a demonstration of the popular VCarve Pro CAD/CAM software and hands-on time creating toolpaths, setting up a job and operating the Axiom Pro CNC router. Woodcraft will supply all necessary materials.