Lumber Deal

Part 1: Monday, July 1, 9 AM - 6 PM

Part 2: Tuesday, July 2, 9 AM - 6 PM

Part 3: Wednesday, July 3, 9 AM - 6 PM

Spring Lumber Deal Valid March 14-20, 2021 From March 14-20, 2021, buy $100 of lumber at the regular price and get a $20 store gift card towards a future purchase.* *** Need to find the perfect wood for your project? We have one of the best selections of domestic and exotic lumber in the Twin Cities! (Well, based on feedback from our customers.) Our store is jammed-packed with new lumber and special buys on 4/4 Spalted Maple, 4/4 Mayan Walnut Shorts, 4/4 Mayan Cherry Shorts, 4/4 Katalox Shorts, and more. Stop by to see our wide selection of lumber, slabs, sheets of plywood, carving blocks, and turning blanks. (*Valid on dimensional and rough cut lumber, sheets of plywood, slabs, carving blocks, or turning blanks at full price. Woodcraft gift card is not redeemable for cash. Gift card does not expire. Additional restrictions may apply. See store for details.)

Router Basics

Saturday, July 13, 1 PM - 2 PM

Making rabbets or putting a roundover edge on a board in your future? Our in-store experts will walk you through what you need to know to start using a router.

Outdoor Finishes

Saturday, July 20, 1 PM - 2 PM

Ensure your outdoor projects can stand up to the weather by choosing the right outdoor finish. Let us show you the options and how to pick the right one for your project.

Hand Plane Tune Up

Saturday, August 10, 1 PM - 2 PM

Making clean cuts with a hand plane is easy – if you have your plane set up properly. Join us as we go over how to dial it in for the right cut.

Food/Child Safe Finish Options

Saturday, August 17, 1 PM - 2 PM

Safety first! Any projects that come in contact with the mouth need special attention with finish. Learn about all the food and child safe finish options available and when you need to use them.

Workbenches and workholding

Saturday, September 14, 1 PM - 2 PM

Where you work makes a big impact on how you work. Let us show you the importance of using a workbench and vises to keep your work steady.

How to Choose a Chuck for your Lathe

Saturday, September 21, 1 PM - 2 PM

Holding your turning blank in place properly means a safe and fun turning experience. Join us as we walk through the different chuck options and when you need to use them.

Sharpening your Tools

Saturday, October 12, 1 PM - 2 PM

Sharp tools are safe tools. Stop in and learn how to properly keep the edge of your tools sharp.

Intro to Knife Making

Saturday, October 19, 1 PM - 2 PM

Build your own custom knife that you (or someone you know) will treasure for years to come. Join us as we walk you through the process.

Joinery Jigs – How to Use/why to buy

Saturday, November 9, 1 PM - 2 PM

A couple boards and some nails might work, but they may not be the best solution to keeping your project in one piece. Join us as we review different types of joinery jigs to help you build a strong finished piece.

Router Jigs and Templates

Saturday, November 16, 1 PM - 2 PM

With a router and a template, you can create custom jigs and fixtures for your shop or complex designs for projects. Learn how to get started today.